Juniper Compatible 10G LR SFP+ Transceiver Module 1310nm 10km
Juniper Networks EX-SFP-10GE-LR Compatible 10G LR SFP+ Transceiver
The Juniper Compatible LR optics is high performance and cost effective SFP+ LR transceiver. It supports data-rate of 10.3125Gbps (10GBASE-SR) over single-mode fiber cable. It is programmed to be compatible with a wide range of Juniper Switches, Routers and Ethernet Media Converters
Product Features
● Multi rate of up to 11.3Gb/s
● 1310nm DFB transmitter
● PIN Receiver
● Duplex LC connector
● Up to 10km on SMF
● < 1W Power Dissipation
● Digital Diagnostic Monitor Interface
● 10G Ethernet compliance or SDH/SONET
● 0℃ to +70℃ / -40~85℃ case operating temperature range
Absolute Maximum Ratings
|
Parameter
|
Symbol
|
Min.
|
Max.
|
Unit
|
Note
|
|
Supply Voltage
|
Vcc
|
-0.5
|
4.0
|
V
|
|
|
Storage Temperature
|
TS
|
-40
|
85
|
°C
|
|
|
Relative Humidity
|
RH
|
0
|
85
|
%
|
|
Note: Stress in excess of the maximum absolute ratings can cause permanent damage to the transceiver.
General Operating Characteristics
|
Parameter
|
Symbol
|
Min.
|
Typ
|
Max.
|
Unit
|
Note
|
|
Data Rate
|
|
9.953
|
10.3125
|
11.3
|
Gb/s
|
|
|
Supply Voltage
|
Vcc
|
3.13
|
3.3
|
3.47
|
V
|
|
|
Supply Current
|
Icc5
|
|
|
300
|
mA
|
|
|
Operating Case Temp.
|
Tc
|
0
|
|
70
|
°C
|
|
|
TI
|
-40
|
|
85
|
|
Digital Diagnostic Specifications
The OLSP311XL-C(I)D10 transceivers can be used in host systems that require either internally or externally calibrated digital diagnostics.
|
Parameter
|
Symbol
|
Units
|
Min.
|
Max.
|
Accuracy
|
Note
|
|
Transceiver temperature
|
DTemp-E
|
ºC
|
-45
|
+90
|
±5ºC
|
1,2
|
|
Transceiver supply voltage
|
DVoltage
|
V
|
2.8
|
4.0
|
±3%
|
|
|
Transmitter bias current
|
DBias
|
mA
|
2
|
80
|
±10%
|
3
|
|
Transmitter output power
|
DTx-Power
|
dBm
|
-8
|
+2
|
±2dB
|
|
|
Receiver average input power
|
DRx-Power
|
dBm
|
-16
|
0
|
±2dB
|
|
Notes:
1.When Operating temp.=0~70 ºC,the range will be min=-5,Max=+75
2. Internally measured
3. The accuracy of the Tx bias current is 10% of the actual current from the laser driver to the laser
Applications
● Widely used on 10G switches, routers, servers, NICs and other transmission equipment
● Suitable for data center, enterprise wiring closet, radio & baseband unit and other environments
● Other optical links
● 10G Ethernet
Compatibility
Olinkcom's Juniper Compatible 10GBASE-LR SFP+ transceiver can be worked with the below Juniper networks equipment.
• EX2300-24T
• EX2300-24P
• EX3300 Ethernet Switch-EX3300-24T
• EX3300 Ethernet Switch-EX3300-48T
• EX3300 Ethernet Switch-EX3300-48T-BF
• EX3300 Ethernet Switch-EX3300-24P
• EX3300 Ethernet Switch-EX3300-48P
• EX3300 Ethernet Switch-EX3300-24T-DC
• EX4300-48T-AFI
• EX4300-48T-DC
• EX4300-48T-DC-AFI
• EX4300-32F
• EX4300-32F-DC
• EX4550-32F
• EX4550-32T
• EX4600-40F-AFO
Product Tags:
|
|
Juniper Compatible 10G LR SFP+ Transceiver Module 1310nm 10km Images
|
